Amp Terminal
Amp Terminal

How do I get my son DVC 1 ohm sub to run at 2 ohm my amp?
This is my current connection string with 1 amps Pioneer: right Administration Sub + enclosure + amp to connect the left boundary of the administration sub - speaker wire to the - terminal of the amplifier administration of law - to the left terminal in Amp + is a chain of submarine. I want to make sure I do this job properly, because for some reason (the computer May be bad), my Hifonics Amp not push my sub, but my Pioneer. Additionally, fuses pop, amplifier is not protected, and blue lights Turn on the computer. Internal Bad? Sparky and thank you to any other person who could answer this question.
As http://i81.photobucket.com/albums/j230/sparky3489/SERIES-DUAL.jpg Each roll is 1 ohm, right? ______________ ... And WTF is with the first, Crack Kills !!!!!!!! Obviously you know nothing about car audio. I know because He said he had a DVC (dual coil) to add resistance 1 ohm to 2 ohms is not, but rather as 3 if they were all connected in series. Even if it were an SVC, the resistance would cost more than a subwoofer (which would be the smartest thing to do), would reduce the overall performance of half of half the signal is lost in the resistance and heat dissipation become extremely so much power. An "impedance matching block is a matching transformer. Find one who could handle the Power Amp off, cost over $ 500, again a sub would be less expensive. NEVER suggest resistance in car audio. If you do not know, no answer.
Marantz SR 6004 A / V receiver Marantz examination was associated with stereo receivers and produces a wide range of components the last 40 years. Times have changed from when all the receivers were at the heart of more than a 2-channel stereo and was called to serve as an amplifier, tuner and phono stage. Today, a receiver can not get a second look at unless it can serve as the actual video, too ...
![]() |
![]() Fiberglass Turret Terminal Strip 24 Lug Tag Board amp US $9.49
|
![]() 5pcs Point to Point Terminal strip 7 Port DIY tube amp US $7.49
|
![]() Fiberglass Turret Terminal Strip 12 Lug Tag Board amp 2 US $9.99
|
![]() 5pcs Point to Point Terminal strip 10 Port DIY tube amp US $8.99
|
![]() lot of 10 NOS tube amp solder terminal strips US $8.99
|
![]() 5pcs Point to Point Terminal strip 5 Port DIY tube amp US $6.64
|
![]() 2SPEAKER TERMINAL AMP Spring Load BINDING POST5018 US $3.50
|
![]() 1 blue Terminal Board 44Lug DIY Tube Audio amp Projects US $9.97
|
![]() PKG6 Terminal Strip 7 Lug Point to Point Tube Amp DIY US $7.20
|
![]() PK6 Point to Point Terminal Strip 5 Lug Tube Amp DIY US $5.80
|
![]() Terminal Board 40Lug Tube Amp 2A3 300B 12AX7 6922 211 US $5.00
|
![]() Terminal Strip 3 Lug Point to Point Tube Amp DIY 6PCS US $3.99
|
| Powered by phpBay Pro |
[phpzonsidebar title="Amazon Products" keywords="Amp Terminal" num="4" country="US" searchindex="Electronics" trackingid="traffi02-20" minprice="10000"]


US $9.49










